How can JIMO help?
Highlights
Most searched
Selecione uma região / Select a region / Seleccione una región
Selecione / Select / Seleccione
JIMO Água-Repelente 700 is a water-based water repellent, ready to use, developed to protect porous surfaces. It contains microparticles that penetrate, react, and strongly adhere to the substrate, forming a chemical barrier that repels and reduces water absorption.
Repels rainwater, preventing mold, mildew, efflorescence, and darkening of vertical or sloped surfaces such as walls, facades, and roofs
Water-based
Does not alter the appearance of the surface
Does not form a film
Prevents mold and mildew
Protection for porous surfaces such as bricks, roof tiles, exposed concrete, and natural stones
Repels water, keeping walls and facades dry, clean, and protected for longer.
Does not alter the appearance of the surface, allowing the material’s natural breathability without forming a film.
JIMO ÁGUA-REPELENTE 700 must be applied to dry and clean, porous surfaces, free of irregularities (holes, cracks, fissures, peeling), and free of dust, calcination, efflorescence, oil or grease stains. Never apply to damp surfaces; wait at least 48 to 72 hours of dry and sunny weather before proceeding with the application.
Stir the product before use. Apply from top to bottom using a brush, wide brush, or spray gun, with a generous coat of JIMO ÁGUA-REPELENTE 700 until the surface is evenly moistened, without dripping. On surfaces with high absorption capacity, it is possible to apply up to two coats, as long as it is wet-on-wet, with less than 15 minutes between the first and second coat.
On substrates with low porosity, any excess product must be removed with a dry cloth to avoid staining.
Surfaces treated with JIMO ÁGUA-REPELENTE 700 can receive paints or any other finish based on organic solvents. Water-based paints cannot be applied, as they reveal the water-repellent action of the product.
The product dries in 24 to 48 hours. Full curing occurs in three weeks, depending on local climate conditions.
Check if there is adequate porosity on the surface, ensuring that the product is absorbed.
Yield between 8 m²/L to 14 m²/L, depending on the surface porosity, to ensure the product can penetrate.
Yes, it can be applied, as long as the surface has adequate porosity and the product can be absorbed.
One to two coats, depending on the surface porosity, without excess, as long as it is wet-on-wet, applying from top to bottom.
Drying takes 24 to 48 hours, and full curing occurs in three weeks, depending on local climate conditions.
Surfaces treated with the product can receive paints or any other finish based on organic solvent; water-based paints cannot be applied. The application of emulsion paints must be preceded by a test.
EAN 7896027010152– Bombona 3,6 litros
EAN 7896027010169 – Bombona 10 litros
3910.00.30
Download and consult the available digital content.
Discover our product lines designed with quality and innovation for you and your family
Produtos para limpeza, manutenção e estética automotiva
Produtos de alta performance de uso profissional
Frequently asked questions about procedures in cases of poisoning
Send a message with suggestions, complaints, or general requests
Send a message if you have any business questions